|Curved Single-Sided 3×3 Pop-Up Template
|Straight Single-Sided 3×3 Pop-Up Template
|Pop-Up Carry Case Graphic Template
|850mm × 2150mm Roller Banner Template
These templates will help you create your design at the correct size, shape and proportion for the Exhibition Combo Pack, and are setup at 20% scale of full size.
The vertical guides indicate the splits between panels. It’s recommended to minimise the amount of text that crosses over the splits.
Please be aware that each end panel curves around the side of the unit and create your design accordingly. See the overhead illustration for positions of each panel.
The central 600mm (indicated with the vertical guides) will be shown on the front of the stand. Artwork outside of this area curves around the sides and back.
The bottom 30mm area (150mm at full size) must only be used for background colours/images or left blank. This section will be hidden and rolled into the unit mechanism. Your 2150mm tall design should bleed at least a third of the way into this area to allow for any height variance of the unit and prevent any white edge showing.
Please allow a 6mm (30mm at full size) quiet area for any important content from the very top of the artwork (see guide). This will ensure the top metal rail doesn’t interfere with your design.
For our InDesign, Illustrator and EPS templates, instructions are located off-page on a separate, locked layer. However, our PDF templates show instructions within the page.
When supplying your print-ready artwork, please follow our artwork requirements.
Please log in to view our marketing resources.nIf you do not have an account with us please register now.
Please log in to view our image downloads.nIf you do not have an account with us please register now.