WE PROVIDED A BESPOKE CREATIVE SERVICE FOR EXTERIOR SIGNAGE

NiS

Hover over the blue spots below to view the sign types used in this project

Home » Projects » NIS

WE WORKED CLOSELY WITH SPECIALISTS IN UTILITY INSTRUMENTATION AND PLANT

LARGE ACRYLIC FREESTANDING LOGO

Main fascia – 18 metre anthracite grey aluminium composite tray fitted to existing frame. Halo illuminated Aluminium built up letters, powder coated white are mounted on locators to sit approx. 20mm from surface. Each letter hosts RGB LEDS, which allows the customer the adjust the colours of the sign to their choosing via a remote. These create a subtle halo glow around each of the letter and we avoid spotting by using an Opal backing to each letter which diffuses the LEDS. Wiring and drivers for the sign is kept within the grey backtray, maintaining a clean and high quality finish.

Freestanding logo – Using Blue 743 acrylic we manufactured a large 1.8m freestanding logo. To provide strength we used an aluminium back tray which hosts blue LEDS, providing full illumination for the front and side of the logo. A concrete pad was installed by the customer which when fixed into provided stability for the sign. Side sign – Halo illuminated Aluminium built up logo, powder coated to branding blue. RGB LEDS provide a halo illumination, again allowing colour change via remote control. Mounted onto side of building on locators, wiring is then fed through the building and wired to a provided feed.